max/tmk_keyboard
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

sun_usb: Update README and rename to .md

Browse source
This commit is contained in:
tmk 2020-04-08 17:48:20 +09:00
parent 8898747b09
commit 05c2df1237
1 changed files with 41 additions and 28 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

69
converter/sun_usb/README → converter/sun_usb/README.md
View file

@ -1,30 +1,31 @@
Sun to USB keyboard protocol converter
======================================
Target MCU is ATMega32u4 but other USB capable AVR will also work.
Target MCU is ATMega32u2/4 but other USB capable AVR will also work.
This converter will work with Sun Type 2-5 Keyboards.
Tested on:
Sun Type 3 Keyboard: http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html
CTCSP SHORT TYPE KEYBOARD(Type 5): http://imgur.com/a/QIv6p
Check wiki pages for other information about TMK keyobard firware.
https://github.com/tmk/tmk_keyboard/wiki
Keymap of Type 3(keymap_sun3.c) were impoted from dastels's repository.
https://github.com/dastels/tmk_keyboard/tree/master/converter/sun3_usb
Update
------
2020-04-08 Added unimap support
Connector
---------
8Pin mini DIN
___ ___
/ |_| \
/ 8 7 6 \
| 5 4 3 |
\_ 2 1 _/
\_____/
(receptacle)
Modern Type 4 and 5 keyboards uses 8Pin mini DIN.
___ ___
/ |_| \
/ 8 7 6 \
| 5 4 3 |
\_ 2 1 _/
\_____/
(receptacle)
Wiring:
Pin mini DIN MCU
@ -42,18 +43,19 @@ Connector
Protocol
--------
Signal: Asynchronous, Negative logic, 1200baud, No Flow control
Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
AVR USART engine expects positive logic while Sun keyboard signal is negative.
To use AVR UART engine you need external inverter in front of RX and TX pin.
Otherwise you can software serial routine to communicate the keyboard.
AVR USART engine expects positive logic while Sun keyboard signal is negative.
To use AVR UART engine you need external inverter in front of RX and TX pin.
Otherwise you can use software serial to communicate the keyboard.
This converter uses software method by default, so you don't need any inverter part. But
it can also be built with 'make HARDWARE_SERIAL=y' to enable hardware serial if there
is an inverter present. Good results have been obtained using a 74LS04 and hardware serial.
This firmware uses software serial by default, so you don't need any inverter.
It can be still built with 'make HARDWARE_SERIAL=y' to enable hardware serial if you have inverter. You can use 74LS04 for example.
Commands From System To Keyboard
### Commands From System To Keyboard
0x01 Reset
Keyboard responds with following byte sequence:
Success: 0xFF 0x04 0x7F
@ -69,27 +71,29 @@ Commands From System To Keyboard
0x0F Layout
Keyboard responds with 'Layout Response' 0xFE 0xXX
Commands From Keyboard To System
### Commands From Keyboard To System
0x7F Idle
means no keys pressed.
0xFE Layout Response
0xFF Reset Response(followed by 0x04)
Reference
http://kentie.net/article/sunkbd/page2.htm
http://kentie.net/article/sunkbd/KBD.pdf
### Reference
- http://kentie.net/article/sunkbd/page2.htm
- http://kentie.net/article/sunkbd/KBD.pdf
Build Firmware
--------------
Just use 'make'
$ cd sun_usb
$ make
Then, load the binary to MCU with your favorite programmer.
Sun commands
------------
Keyboard Control
----------------
You can send Sun protocol commands with TMK `Magic` key combo. By default `Magic` key is `LShift` + `RShift`, `LAlt` + `RAlt' or `LMeta` + `RMeta`.
https://github.com/tmk/tmk_keyboard#magic-commands
@ -106,3 +110,12 @@ PgDown: LED all On
Insert: Layout
Delete: Reset
```
Tested on
---------
### Type 3
http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html
### CTCSP SHORT TYPE KEYBOARD(Type 5)
http://imgur.com/a/QIv6p