max/tmk_keyboard
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add PC-8801 Keyboard support. (#620)

Browse source 
* Add PC-8801 Keyboard support.

* Add PC-8801 Keyboard support.

* Add PC-8801 Keyboard support.
This commit is contained in:
Haruka Inoue 2019-07-23 10:14:59 +09:00 • committed by hasu@tmk
parent a1711da934
commit 229693e687
10 changed files with 738 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

101
converter/pc88_usb/Makefile Normal file
View file

@ -0,0 +1,101 @@
# Target file name (without extension).
TARGET ?= pc88_usb
# Directory common source filess exist
TMK_DIR ?= ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR ?= .
# keyboard dependent files
# Add one of lines below to select serial protocol implementation
# protocol/serial_uart.c
# protocol/serial_soft.c
SRC ?= matrix.c \
protocol/serial_uart.c
CONFIG_H ?= config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
MCU ?= atmega32u2 # TMK Converter
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU ?= 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# *Comment out* to disable the options.
#
MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control
CONSOLE_ENABLE ?= yes # Console for debug
COMMAND_ENABLE ?= yes # Commands for debug and configuration
#NKRO_ENABLE ?= yes # USB Nkey Rollover
##UNIMAP_ENABLE ?= yes
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
#
# Keymap file
#
ifeq (yes,$(strip $(UNIMAP_ENABLE)))
KEYMAP_FILE = unimap
else
ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
KEYMAP_FILE = actionmap
else
KEYMAP_FILE = keymap
endif
endif
ifdef KEYMAP
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
else
SRC := $(KEYMAP_FILE).c $(SRC)
endif
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

4
converter/pc88_usb/Makefile.32u4 Normal file
View file

@ -0,0 +1,4 @@
TARGET ?= pc88_usb_32u4
MCU ?= atmega32u4
include Makefile

101
converter/pc88_usb/Makefile.unimap Normal file
View file

@ -0,0 +1,101 @@
# Target file name (without extension).
TARGET ?= pc88_usb_unimap
# Directory common source filess exist
TMK_DIR ?= ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR ?= .
# keyboard dependent files
# Add one of lines below to select serial protocol implementation
# protocol/serial_uart.c
# protocol/serial_soft.c
SRC ?= matrix.c \
protocol/serial_uart.c
CONFIG_H ?= config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
MCU ?= atmega32u2 # TMK Converter
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU ?= 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# *Comment out* to disable the options.
#
MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control
CONSOLE_ENABLE ?= yes # Console for debug
COMMAND_ENABLE ?= yes # Commands for debug and configuration
#NKRO_ENABLE ?= yes # USB Nkey Rollover
UNIMAP_ENABLE ?= yes
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
#
# Keymap file
#
ifeq (yes,$(strip $(UNIMAP_ENABLE)))
KEYMAP_FILE = unimap
else
ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
KEYMAP_FILE = actionmap
else
KEYMAP_FILE = keymap
endif
endif
ifdef KEYMAP
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
else
SRC := $(KEYMAP_FILE).c $(SRC)
endif
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

4
converter/pc88_usb/Makefile.unimap.32u4 Normal file
View file

@ -0,0 +1,4 @@
TARGET ?= pc88_usb_32u4_unimap
MCU ?= atmega32u4
include Makefile.unimap

73
converter/pc88_usb/README Normal file
View file

@ -0,0 +1,73 @@
PC88(Late type) to USB keyboard protocol converter
=======================================
Target MCU is ATMega32u2 but other USB capable AVR will also work.
README FIRST
---------
This converter is for TYPE-B keyboard. For keyboards other than TYPE-B,
change the mode switch on the back of the keyboard.
Stand the left foot on the back of the keyboard and there are two slits.
There is a mode change switch in the back of it.
When this switch is up, TYPE-B mode is set.
When connecting a keyboard to this adapter, be sure to set to TYPE-B mode.
Connector
---------
On host/converter:
5Pin mini DIN
___ ___
/ |_| \
/ 5 4 \
| 3 | 2 |
\_ 1 _/
\_____/
(receptacle)
Wiring: You can change this with editing config.h.
Pin mini DIN MCU
----------------------------------
1 5V VCC
2 GND GND
3 DATA RD2
4 NC
5 NC
Protocol
--------
Signal: Asynchronous, Positive logic, 20800bps, Least bit first
Frame format: 1-Start bit(Lo), 8-Data bits, non-Parity, 1-Stop bit
Build Firmware
--------------
Just use 'make' to bild firmware for TMK PC88 converter.
$ make -f Makefile.unimap clean
$ make -f Makefile.unimap
To flash firmware
$ make -f Makefile.unimap dfu
then push button on converter to flash firmware.
If you are using ATMega32u4 based board instead of premade TMK PC88 converter(ATMega32u2) use following commands.
$ make -f Makefile.unimap.32u4 clean
$ make -f Makefile.unimap.32u4
$ make -f Makefile.unimap.32u4 dfu

121
converter/pc88_usb/config.h Normal file
View file

@ -0,0 +1,121 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x8801
#define DEVICE_VER 0x0101
#define MANUFACTURER t.m.k.
#define PRODUCT PC88 keyboard converter
#define DESCRIPTION converts PC88 keyboard protocol into USB
/* matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->keys[0] == KC_STOP || \
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) \
)
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* PC88 Serial(USART) configuration
* asynchronous, positive logic, 20800baud, bit order: LSB first
* 1-start bit, 8-data bit, non parity, 1-stop bit
*/
/*
* Software Serial
* Add protocol/serial_soft.c to SRC in Makefile
*/
#define SERIAL_SOFT_BAUD 20800
#define SERIAL_SOFT_PARITY_NONE
#define SERIAL_SOFT_BIT_ORDER_LSB
#define SERIAL_SOFT_LOGIC_POSITIVE
/* RXD Port */
#define SERIAL_SOFT_RXD_DDR DDRD
#define SERIAL_SOFT_RXD_PORT PORTD
#define SERIAL_SOFT_RXD_PIN PIND
#define SERIAL_SOFT_RXD_BIT 2
#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
/* RXD Interupt */
#define SERIAL_SOFT_RXD_VECT INT2_vect
#define SERIAL_SOFT_RXD_INIT() do { \
/* pin configuration: input with pull-up */ \
SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
/* enable interrupt: INT2(falling edge) */ \
EICRA |= ((1<<ISC21)|(0<<ISC20)); \
EIMSK |= (1<<INT2); \
sei(); \
} while (0)
#define SERIAL_SOFT_RXD_INT_ENTER()
#define SERIAL_SOFT_RXD_INT_EXIT() do { \
/* clear interrupt flag */ \
EIFR = (1<<INTF2); \
} while (0)
/* TXD Port */
#define SERIAL_SOFT_TXD_DDR DDRD
#define SERIAL_SOFT_TXD_PORT PORTD
#define SERIAL_SOFT_TXD_PIN PIND
#define SERIAL_SOFT_TXD_BIT 3
#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
#define SERIAL_SOFT_TXD_INIT() do { \
/* pin configuration: output */ \
SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
/* idle */ \
SERIAL_SOFT_TXD_ON(); \
} while (0)
/*
* Hardware Serial(UART)
* Add protocol/serial_uart.c to SRC in Makefile
*/
#if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__)
#define SERIAL_UART_BAUD 20800
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
DDRD &= ~(1<<2); PORTD |= (1<<2); /* Pull-up RXD pin */ \
sei(); \
} while(0)
#else
#error "USART configuration is needed."
#endif
#endif

130
converter/pc88_usb/keymap.c Normal file
View file

@ -0,0 +1,130 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "keycode.h"
#include "action.h"
#include "util.h"
#include "serial.h"
#include "keymap.h"
// Following macros help you to define a keymap with the form of actual keyboard layout.
/* Keyboard Scan codes
* ,---. ,---. ,------------------------. ,------------------------. ,-------.
* | 60| | 61| | 62 | 63 | 64 | 65 | 66 | | 67 | 68 | 69 | 6A | 6B | | 36| 37|
* `---' `---' `------------------------' `------------------------' `-------'
* ,---------------------------------------------------------------. ,-------. ,---------------.
* | 00 | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | | 38| 39| | 3E| 3F| 4D| 41|
* |---------------------------------------------------------------| `-------' |---------------|
* | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| | | 42| 43| 44| 45|
* |--------------------------------------------------------` 1C | ,-------. |---------------|
* | 74| 71| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| | | 3A | | 46| 47| 48| 49|
* |---------------------------------------------------------------| |-------| |---------------|
* | 70 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 78 | | 3B| 3C| | 4A| 4B| 4C| 4D|
* `---------------------------------------------------------------' |-------| |---------------|
* | 72| 73| 51 | 34 | 35 | 7A| 7B| | 3D | | 4E| 4F| 50| 79|
* `-------------------------------------------' `-------' `---------------'
*/
#define KEYMAP( \
K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, K36, K37, \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K38, K39, K3E, K3F, K40, K41, \
K0F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K42, K43, K44, K45, \
K74, K71, K1D, K1E, K1F, K20, K21, K22, K23, K24, K25, K26, K27,K28, K3A, K46, K47, K48, K49, \
K70, K29, K2A, K2B, K2C, K2D, K2E, K2F, K30, K31, K32, K33, K78, K3B, K3C, K4A, K4B, K4C, K4D, \
K72, K73, K51, K34, K35, K7A, K7B, K3D, K4E, K4F, K50, K79 \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
{ KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
{ KC_##K50, KC_##K51, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_NO, KC_NO, KC_NO }, \
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_NO, KC_NO, KC_NO, KC_NO } \
}
const action_t fn_actions[] PROGMEM = {
[0] = ACTION_FUNCTION(0), // toggle all LEDs
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
static bool led = false;
switch (id) {
case 0:
if (record->event.pressed) {
if ((led = !led))
serial_send(0x80); // all on
else
serial_send(0xff); // all off
}
break;
}
}
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keyboard Scan codes
* ,---. ,---. ,------------------------. ,------------------------. ,-------.
* | 60| | 61| | 62 | 63 | 64 | 65 | 66 | | 67 | 68 | 69 | 6A | 6B | | 36| 37|
* `---' `---' `------------------------' `------------------------' `-------'
* ,---------------------------------------------------------------. ,-------. ,---------------.
* | 00 | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | | 38| 39| | 3E| 3F| 4D| 41|
* |---------------------------------------------------------------| `-------' |---------------|
* | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| | | 42| 43| 44| 45|
* |--------------------------------------------------------` 1C | ,-------. |---------------|
* | 74| 71| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| | | 3A | | 46| 47| 48| 49|
* |---------------------------------------------------------------| |-------| |---------------|
* | 70 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 78 | | 3B| 3C| | 4A| 4B| 4C| 4D|
* `---------------------------------------------------------------' |-------| |---------------|
* | 72| 73| 51 | 34 | 35 | 7A| 7B| | 3D | | 4E| 4F| 50| 79|
* `-------------------------------------------' `-------' `---------------'
*/
/* ANSI */
KEYMAP(
PAUS,PSCR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PGDN,PGUP,
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSLS,BSPC, INS, DEL, HOME, END,PMNS,PSLS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, P7, P8, P9, PAST,
LCTL,LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT,F18, UP, P4, P5, P6, PPLS,
LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,GRV, RSFT, LEFT,RGHT, P1, P2, P3, PEQL,
F19, LGUI,LALT, SPC, RALT, APP, RGUI, DOWN, P0, PCMM,PDOT,PENT
),
/* JIS */
KEYMAP(
PAUS, PSCR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PGDN,PGUP,
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, JYEN,BSPC, INS, DEL, HOME, END,PMNS,PSLS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, P7, P8, P9, PAST,
LCTL,LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, UP, P4, P5, P6, PPLS,
LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, LEFT,RGHT, P1, P2, P3, PEQL,
KANA,LALT,MHEN, SPC, HENK, RGUI,ZKHK, DOWN, P0, PCMM,PDOT,PENT
),
};

95
converter/pc88_usb/matrix.c Normal file
View file

@ -0,0 +1,95 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "util.h"
#include "matrix.h"
#include "led.h"
#include "debug.h"
#include "protocol/serial.h"
/*
* Matrix Array usage:
*
* ROW: 16(4bits)
* COL: 8(3bits)
*
* 8bit wide
* +---------+
* 0|00 ... 07|
* 1|08 ... 0F|
* :| ... |
* :| ... |
* E|70 ... 77|
* F|78 ... 7F|
* +---------+
*/
static uint8_t matrix[MATRIX_ROWS];
#define ROW(code) ((code>>3)&0xF)
#define COL(code) (code&0x07)
void matrix_init(void)
{
debug_keyboard = true;
serial_init();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
print("matrix_init done.\n");
return;
}
uint8_t matrix_scan(void)
{
uint16_t code;
code = serial_recv2();
if (code == -1) {
return 0;
}
print_hex8(code); print(" ");
if (code&0x80) {
// break code
if (matrix_is_on(ROW(code), COL(code))) {
matrix[ROW(code)] &= ~(1<<COL(code));
}
} else {
// make code
if (!matrix_is_on(ROW(code), COL(code))) {
matrix[ROW(code)] |= (1<<COL(code));
}
}
return code;
}
inline
uint8_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void led_set(uint8_t usb_led)
{
}

45
converter/pc88_usb/unimap.c Normal file
View file

@ -0,0 +1,45 @@
/*
Copyright 2017 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "unimap_trans.h"
#define AC_FN0 ACTION_LAYER_MOMENTARY(1)
#ifdef KEYMAP_SECTION_ENABLE
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
#else
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] PROGMEM = {
#endif
UNIMAP(
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, COMM,
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PENT,
LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,FN0, RCTL, LEFT,DOWN,RGHT, P0, DOT, PEQL
),
UNIMAP(
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP, INS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,LEFT,RGHT, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,END, PGDN,DOWN, TRNS,TRNS, PGUP, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, HOME,PGDN,END, TRNS, TRNS,TRNS
),
};

64
converter/pc88_usb/unimap_trans.h Normal file
View file

@ -0,0 +1,64 @@
/*
Copyright 2018 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _TRANS_H
#define _TRANS_H
#include <stdint.h>
#include <avr/pgmspace.h>
#include "unimap.h"
/* Mapping PC88 scan codes to UNIMAP layout codes
*
* PC88 scan codes
* ,---. ,---. ,------------------------. ,------------------------. ,-------.
* | 60| | 61| | 62 | 63 | 64 | 65 | 66 | | 67 | 68 | 69 | 6A | 6B | | 36| 37|
* `---' `---' `------------------------' `------------------------' `-------'
* ,---------------------------------------------------------------. ,-------. ,---------------.
* | 00 | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | | 38| 39| | 3E| 3F| 4D| 41|
* |---------------------------------------------------------------| `-------' |---------------|
* | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| | | 42| 43| 44| 45|
* |--------------------------------------------------------` 1C | ,-------. |---------------|
* | 74| 71| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| | | 3A | | 46| 47| 48| 49|
* |---------------------------------------------------------------| |-------| |---------------|
* | 70 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 78 | | 3B| 3C| | 4A| 4B| 4C| 4D|
* `---------------------------------------------------------------' |-------| |---------------|
* | 72| 73| 51 | 34 | 35 | 7A| 7B| | 3D | | 4E| 4F| 50| 79|
* `-------------------------------------------' `-------' `---------------'
*
*
*/
const uint8_t PROGMEM unimap_trans[MATRIX_ROWS][MATRIX_COLS] = {
{ UNIMAP_ESC, UNIMAP_1, UNIMAP_2, UNIMAP_3, UNIMAP_4, UNIMAP_5, UNIMAP_6, UNIMAP_7 }, /* 00-07 */
{ UNIMAP_8, UNIMAP_9, UNIMAP_0, UNIMAP_MINS, UNIMAP_EQL, UNIMAP_JYEN, UNIMAP_BSPC, UNIMAP_TAB }, /* 08-0F */
{ UNIMAP_Q, UNIMAP_W, UNIMAP_E, UNIMAP_R, UNIMAP_T, UNIMAP_Y, UNIMAP_U, UNIMAP_I }, /* 10-17 */
{ UNIMAP_O, UNIMAP_P, UNIMAP_LBRC, UNIMAP_RBRC, UNIMAP_ENT, UNIMAP_A, UNIMAP_S, UNIMAP_D }, /* 18-1F */
{ UNIMAP_F, UNIMAP_G, UNIMAP_H, UNIMAP_J, UNIMAP_K, UNIMAP_L, UNIMAP_SCLN, UNIMAP_QUOT }, /* 20-27 */
{ UNIMAP_BSLS, UNIMAP_Z, UNIMAP_X, UNIMAP_C, UNIMAP_V, UNIMAP_B, UNIMAP_N, UNIMAP_M }, /* 28-2F */
{ UNIMAP_COMM, UNIMAP_DOT, UNIMAP_SLSH, UNIMAP_RO, UNIMAP_SPC, UNIMAP_HENK, UNIMAP_PGDN, UNIMAP_PGUP }, /* 30-37 */
{ UNIMAP_INS, UNIMAP_DEL, UNIMAP_UP, UNIMAP_LEFT, UNIMAP_RGHT, UNIMAP_DOWN, UNIMAP_HOME, UNIMAP_END }, /* 38-3F */
{ UNIMAP_PMNS, UNIMAP_PSLS, UNIMAP_P7, UNIMAP_P8, UNIMAP_P9, UNIMAP_PAST, UNIMAP_P4, UNIMAP_P5 }, /* 40-47 */
{ UNIMAP_P6, UNIMAP_PPLS, UNIMAP_P1, UNIMAP_P2, UNIMAP_P3, UNIMAP_PEQL, UNIMAP_P0, UNIMAP_PCMM }, /* 48-4F */
{ UNIMAP_PDOT, UNIMAP_MHEN, UNIMAP_F11, UNIMAP_F12, UNIMAP_F13, UNIMAP_F14, UNIMAP_F15, UNIMAP_NO }, /* 50-57 */
{ UNIMAP_F21, UNIMAP_F22, UNIMAP_F23, UNIMAP_F24, UNIMAP_NO, UNIMAP_NO, UNIMAP_APP, UNIMAP_NO }, /* 58-5F */
{ UNIMAP_PAUS, UNIMAP_PSCR, UNIMAP_F1, UNIMAP_F2, UNIMAP_F3, UNIMAP_F4, UNIMAP_F5, UNIMAP_F6 }, /* 60-67 */
{ UNIMAP_F7, UNIMAP_F8, UNIMAP_F9, UNIMAP_F10, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 68-6F */
{ UNIMAP_LSFT, UNIMAP_CAPS, UNIMAP_KANA, UNIMAP_LALT, UNIMAP_LCTL, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 70-77 */
{ UNIMAP_RSFT, UNIMAP_PENT, UNIMAP_RGUI, UNIMAP_GRV, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO } /* 78-7F */
};
#endif