Add PC-8801 Keyboard support. (#620)

* Add PC-8801 Keyboard support. * Add PC-8801 Keyboard support. * Add PC-8801 Keyboard support.
2019-07-23 10:14:59 +09:00 · 2019-07-23 10:14:59 +09:00 · 229693e687
commit 229693e687
parent a1711da934
10 changed files with 738 additions and 0 deletions
--- a/converter/pc88_usb/Makefile
+++ b/converter/pc88_usb/Makefile
@ -0,0 +1,101 @@
+# Target file name (without extension).
+TARGET ?= pc88_usb
+
+# Directory common source filess exist
+TMK_DIR ?= ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR ?= .
+
+# keyboard dependent files
+#   Add one of lines below to select serial protocol implementation
+#	protocol/serial_uart.c
+#	protocol/serial_soft.c
+SRC ?=	matrix.c \
+	protocol/serial_uart.c
+
+CONFIG_H ?= config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU ?= atmega32u2       # TMK Converter
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU ?= 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH ?= AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB ?= $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE ?= yes	# Mouse keys
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control
+CONSOLE_ENABLE ?= yes	# Console for debug
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+#NKRO_ENABLE ?= yes	# USB Nkey Rollover
+##UNIMAP_ENABLE ?= yes
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+#
+# Keymap file
+#
+ifeq (yes,$(strip $(UNIMAP_ENABLE)))
+    KEYMAP_FILE = unimap
+else
+    ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
+        KEYMAP_FILE = actionmap
+    else
+        KEYMAP_FILE = keymap
+    endif
+endif
+ifdef KEYMAP
+    SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
+else
+    SRC := $(KEYMAP_FILE).c $(SRC)
+endif
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk