max/tmk_keyboard
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ps2_usb: Change Makefiles

Browse source
This commit is contained in:
tmk 2016-09-17 10:20:52 +09:00
parent 1c1f7b14e3
commit 5ee5b6bd7e
11 changed files with 87 additions and 308 deletions
Download patch file Download diff file Expand all files Collapse all files

61
converter/ps2_usb/Makefile
View file

@ -1,31 +1,39 @@
#
# Makefile for Teensy
#
# Target file name (without extension).
TARGET = ps2_usb_lufa
TARGET ?= ps2_usb
# Directory common source filess exist
TMK_DIR = ../../tmk_core
TMK_DIR ?= ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
TARGET_DIR ?= .
# project specific files
SRC = matrix.c \
SRC ?= matrix.c \
led.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
#
# Keymap file
#
ifdef UNIMAP_ENABLE
KEYMAP_FILE = unimap
else
SRC := keymap_plain.c $(SRC)
ifdef ACTIONMAP_ENABLE
KEYMAP_FILE = actionmap
else
KEYMAP_FILE = keymap
endif
endif
ifdef KEYMAP
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
else
SRC := $(KEYMAP_FILE)_plain.c $(SRC)
endif
CONFIG_H = config.h
CONFIG_H ?= config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
MCU ?= atmega32u2
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
@ -38,14 +46,14 @@ MCU = atmega32u4
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
F_CPU ?= 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
@ -58,7 +66,7 @@ ARCH = AVR8
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task(+60)
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@ -70,25 +78,26 @@ F_USB = $(F_CPU)
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
BOOTLOADER_SIZE ?= 4096
OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE)
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
# PS/2 Options
#
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
#PS2_USE_USART ?= yes # uses hardware USART engine for PS/2 signal receive(recomened)
PS2_USE_INT ?= yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT ?= yes # uses primitive reference code
# Optimize size but this may cause error "relocation truncated to fit"