max/tmk_keyboard
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ps2_usb: Change Makefiles

Browse source
This commit is contained in:
tmk 2016-09-17 10:20:52 +09:00
parent 1c1f7b14e3
commit 5ee5b6bd7e
11 changed files with 87 additions and 308 deletions
Download patch file Download diff file Expand all files Collapse all files

22
converter/ps2_usb/README.md
View file

@ -5,36 +5,30 @@ This firmware converts PS/2 keyboard protocol to USB.(It supports Scan Code Set
Connect Wires
-------------
In case of Teensy2.0(ATMega32U4):
1. Connect **Vcc** and **GND**.
2. Connect **Clock** and **Data** line.
- **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
- **Busywait**: **Clock** is on `PD1` and **Data** on `PD0`.
- **USART**: **Clock** is on `PD5` and **Data** on `PD2`.
3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
3. You need pull-up resistors. 1K-10K Ohm would be fine.
To change pin configuration edit **config.h** and **Makefile**.
Build Firmware
--------------
For **PJRC Teensy** just run `make`:
For **TMK converter Rev.2**:
$ make clean
$ make
$ make -f Makefile.rev2 clean
$ make -f Makefile.rev2 KEYMAP=plain
To select keymap:
To program firmware push the button on converter and run:
$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]
After that you will find HEX file `ps2_usb_lufa.hex` in current directory.
$ make -f Makefile.rev2 KEYMAP=plain dfu
- For **TMK converter Rev.1** use `make -f Makefile.tmk_rev1` instead of `make` and HEX file is `ps2_usb_tmk_rev1.hex`.
- For **TMK converter Rev.2** use `make -f Makefile.tmk_rev2` instead of `make` and HEX file is `ps2_usb_tmk_rev2.hex`.
- For **TMK converter Rev.1** use `make -f Makefile.rev1` instead.
- To select keymap use `jis`, `spacefn` or your own in place of `plain`.
Keymap