Change Makefile and port setting

- Makefile use LUFA now
- Change MCU ports PF{0,1} to PD{0,1}
- Add build option for keymap to Makefile: make keymap=hasu

converter/m0110_usb/Makefile

@@ -1,5 +1,5 @@
 # Target file name (without extension).
-TARGET = m0110
+TARGET = m0110_lufa
 
 # Directory common source filess exist
 TOP_DIR = ../..
@@ -8,11 +8,17 @@ TOP_DIR = ../..
 TARGET_DIR = .
 
 # keyboard dependent files
-SRC = 	keymap.c \
-	matrix.c \
+SRC =	matrix.c \
 	led.c \
 	m0110.c
 
+# To use own keymap file run make like: make keymap=hasu
+ifdef keymap
+    SRC += keymap_$(keymap).c
+else
+    SRC += keymap.c
+endif
+
 CONFIG_H = config.h
 
 
@@ -32,6 +38,29 @@ MCU = atmega32u4       # Teensy 2.0
 F_CPU = 16000000
 
 
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
 # Boot Section Size in bytes
 #   Teensy halfKay   512
 #   Atmel DFU loader 4096
@@ -61,7 +90,7 @@ VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)
 
 
-include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol/lufa.mk
 include $(TOP_DIR)/protocol.mk
 include $(TOP_DIR)/common.mk
 include $(TOP_DIR)/rules.mk