Add chibi_onekey example.

keyboard/chibi_onekey/Makefile

@@ -0,0 +1,51 @@
+# Target file name (without extension).
+PROJECT = ch
+TARGET = alps64
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+# chip/board
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+MCU_MODEL_FAMILY = STM32F072xB
+# the directory in board/
+BOARD = ST_STM32F072B_DISCOVERY
+# ARM version, M0/M1 are 6, M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware (on STM32 MCUs),
+# set the correct BOOTLOADER_ADDRESS here. Otherwise leave commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios: <tmk_dir>/tmk_core/
+BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk