diff --git a/converter/news_usb/Makefile.pjrc b/converter/news_usb/Makefile.pjrc
deleted file mode 100644
index be7dd92e..00000000
--- a/converter/news_usb/Makefile.pjrc
+++ /dev/null
@@ -1,75 +0,0 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
-# Target file name (without extension).
-TARGET = news_usb_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c \
-	news.c
-
-CONFIG_H = config_pjrc.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-#MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-MCU = atmega32u2       # TMK Converter Rev.2
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   *Comment out* to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
-CONSOLE_ENABLE = yes    # Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/news_usb/config_pjrc.h b/converter/news_usb/config_pjrc.h
deleted file mode 100644
index 3cad3a1f..00000000
--- a/converter/news_usb/config_pjrc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x5021
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         SONY NEWS keyboard converter
-#define DESCRIPTION     converts SONY NEWS protocol into USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 16  // keycode bit: 3-0
-#define MATRIX_COLS 8   // keycode bit: 6-4
-
-
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-/* Asynchronous USART
- * 8-data bit, non parity, 1-stop bit, no flow control
- */
-#if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__)
-#   define NEWS_KBD_RX_VECT        USART1_RX_vect
-#   define NEWS_KBD_RX_DATA        UDR1
-#   define NEWS_KBD_RX_BAUD        9600
-#   define NEWS_KBD_RX_UBBR        ((F_CPU/(16UL*NEWS_KBD_RX_BAUD))-1)
-#   define NEWS_KBD_RX_INIT()      do { \
-        UBRR1L = (uint8_t) NEWS_KBD_RX_UBBR; \
-        UBRR1H = (uint8_t) (NEWS_KBD_RX_UBBR>>8); \
-        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
-    } while(0)
-#else
-#   error "USART configuration is needed."
-#endif
-
-#endif