Merge remote-tracking branch 'tmk/master' into cub_layout

common/command.c

@@ -194,6 +194,7 @@ static bool command_common(uint8_t code)
         case KC_CAPSLOCK:
             if (host_get_driver()) {
                 host_driver = host_get_driver();
+                clear_keyboard();
                 host_set_driver(0);
                 print("Locked.\n");
             } else {

common/keycode.h

@@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-/* 
+/*
  * Keycodes based on HID Usage Keyboard/Keypad Page(0x07) plus special codes
  * http://www.usb.org/developers/devclass_docs/Hut1_12.pdf
  */
@@ -140,6 +140,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define KC_VOLD KC_AUDIO_VOL_DOWN
 #define KC_MNXT KC_MEDIA_NEXT_TRACK
 #define KC_MPRV KC_MEDIA_PREV_TRACK
+#define KC_MFFD KC_MEDIA_FAST_FORWARD
+#define KC_MRWD KC_MEDIA_REWIND
 #define KC_MSTP KC_MEDIA_STOP
 #define KC_MPLY KC_MEDIA_PLAY_PAUSE
 #define KC_MSEL KC_MEDIA_SELECT
@@ -390,7 +392,7 @@ enum hid_keyboard_keypad_usage {
     KC_RALT,
     KC_RGUI,
 
-    /* NOTE: 0xE8-FF are used for internal special purpose */ 
+    /* NOTE: 0xE8-FF are used for internal special purpose */
 };
 
 /* Special keycodes */
@@ -420,7 +422,9 @@ enum internal_special_keycodes {
     KC_WWW_FORWARD,
     KC_WWW_STOP,
     KC_WWW_REFRESH,
-    KC_WWW_FAVORITES,   /* 0xBA */
+    KC_WWW_FAVORITES,
+    KC_MEDIA_FAST_FORWARD,
+    KC_MEDIA_REWIND,    /* 0xBC */
 
     /* Fn key */
     KC_FN0              = 0xC0,

common/report.h

@@ -61,6 +61,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* supplement for Bluegiga iWRAP HID(not supported by Windows?) */
 #define AL_LOCK                 0x019E
 #define TRANSPORT_RECORD        0x00B2
+#define TRANSPORT_FAST_FORWARD  0x00B3
 #define TRANSPORT_REWIND        0x00B4
 #define TRANSPORT_EJECT         0x00B8
 #define AC_MINIMIZE             0x0206
@@ -158,6 +159,8 @@ typedef struct {
     (key == KC_AUDIO_VOL_DOWN   ?  AUDIO_VOL_DOWN : \
     (key == KC_MEDIA_NEXT_TRACK ?  TRANSPORT_NEXT_TRACK : \
     (key == KC_MEDIA_PREV_TRACK ?  TRANSPORT_PREV_TRACK : \
+    (key == KC_MEDIA_FAST_FORWARD ?  TRANSPORT_FAST_FORWARD : \
+    (key == KC_MEDIA_REWIND     ?  TRANSPORT_REWIND : \
     (key == KC_MEDIA_STOP       ?  TRANSPORT_STOP : \
     (key == KC_MEDIA_EJECT      ?  TRANSPORT_STOP_EJECT : \
     (key == KC_MEDIA_PLAY_PAUSE ?  TRANSPORT_PLAY_PAUSE : \
@@ -171,7 +174,7 @@ typedef struct {
     (key == KC_WWW_FORWARD      ?  AC_FORWARD : \
     (key == KC_WWW_STOP         ?  AC_STOP : \
     (key == KC_WWW_REFRESH      ?  AC_REFRESH : \
-    (key == KC_WWW_FAVORITES    ?  AC_BOOKMARKS : 0)))))))))))))))))))
+    (key == KC_WWW_FAVORITES    ?  AC_BOOKMARKS : 0)))))))))))))))))))))
 
 #ifdef __cplusplus
 }

converter/usb_usb/README

@@ -7,7 +7,19 @@ Arduino Leonardo
     http://arduino.cc/en/Main/ArduinoBoardLeonardo 
 
 Circuit@Home USB Host Shield 2.0
-    http://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino
+    https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino-assembled/
+
+Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be the easiest way, you won't need even soldering iron.
+Arduino's Shield will also work well but I think Sparkfun's needs to be modified.
+
+    http://arduino.cc/en/Main/ArduinoUSBHostShield
+    https://www.sparkfun.com/products/9947
+
+Also Pro Micro 3.3V(not Mini) or Teensy with mini host shield will work with some fixes on signal/power routing.
+    https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini
+    https://www.sparkfun.com/products/12587
+    https://www.pjrc.com/teensy/td_libs_USBHostShield.html
+
 
 
 Build firmware
@@ -32,6 +44,8 @@ Limitation
 Only supports 'HID Boot protocol'.
 Not support keyboard LED yet.
 
+Note that the converter can host only USB "boot protocol" keyboard(6KRO) and not NKRO, it is possible to support NKRO keyboard but you will need to write HID report parser for that. Every NKRO keyboard can have different HID report and it is difficult to support all kind of NKRO keyboards in the market.
+
 
 
 Update

protocol.mk

@@ -15,11 +15,13 @@ endif
 
 ifdef PS2_USE_INT
     SRC += protocol/ps2_interrupt.c
+    SRC += protocol/ps2_io_avr.c
     OPT_DEFS += -DPS2_USE_INT
 endif
 
 ifdef PS2_USE_USART
     SRC += protocol/ps2_usart.c
+    SRC += protocol/ps2_io_avr.c
     OPT_DEFS += -DPS2_USE_USART
 endif
 

protocol/ps2_io_avr.c

@@ -1,4 +1,5 @@
 #include <stdbool.h>
+#include <avr/io.h>
 #include <util/delay.h>
 
 /* Check port settings for clock and data line */