Move some projects to 'orphan' directory

orphan/macway/Makefile.lufa

@@ -0,0 +1,121 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_lufa
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC +=	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk

orphan/macway/Makefile.pjrc

@@ -0,0 +1,97 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = macway_pjrc
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	keymap.c \
+	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk

orphan/macway/config.h

@@ -0,0 +1,63 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xBEE0
+#define DEVICE_VER      0x0202
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         Macway mod
+
+/* message strings */
+#define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
+
+/* matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+#define MATRIX_HAS_GHOST
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE    5
+
+/* legacy keymap support */
+#define USE_LEGACY_KEYMAP
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* PS/2 mouse */
+#ifdef PS2_MOUSE_ENABLE
+#   define PS2_CLOCK_PORT  PORTF
+#   define PS2_CLOCK_PIN   PINF
+#   define PS2_CLOCK_DDR   DDRF
+#   define PS2_CLOCK_BIT   0
+#   define PS2_DATA_PORT   PORTF
+#   define PS2_DATA_PIN    PINF
+#   define PS2_DATA_DDR    DDRF
+#   define PS2_DATA_BIT    1
+#endif
+
+#endif

orphan/macway/keymap.c

@@ -0,0 +1,195 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for Macway mod
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+#define KEYMAP( \
+    K11, K10, K20, K30, K40, K41, K51, K50, K60, K70, K80, K81, K61, K02, \
+    K12, K13, K23, K33, K43, K42, K52, K53, K63, K73, K83, K82, K62, K01, \
+    K15, K14, K24, K34, K44, K45, K55, K54, K64, K74, K84, K85, K06, \
+    K67, K16, K26, K36, K46, K47, K57, K56, K66, K76, K87, K32, K35, \
+    K75, K22, K00, K07, K21, K04, K37, K27, K17 \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_NO,    KC_##K04, KC_NO,    KC_##K06, KC_##K07 }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_NO,    KC_##K26, KC_##K27 }, \
+    { KC_##K30, KC_NO,    KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
+    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_NO,    KC_##K66, KC_##K67 }, \
+    { KC_##K70, KC_NO,    KC_NO,    KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO    }, \
+    { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_NO,    KC_##K87 } \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    1,              // Fn1
+    2,              // Fn2
+    3,              // Fn3
+    4,              // Fn4
+    0,              // Fn5
+    3,              // Fn6
+    3               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KC_NO,          // Fn0
+    KC_NO,          // Fn1
+    KC_SLSH,        // Fn2
+    KC_SCLN,        // Fn3
+    KC_SPC,         // Fn4
+    KC_NO,          // Fn5
+    KC_NO,          // Fn6
+    KC_NO           // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     |
+     * |-----------------------------------------------------'     |
+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn1|
+     * |-----------------------------------------------------------|
+     * |Fn7|Gui |Alt  |Fn4                   |Alt  |Gui|Fn6|Fn6|Ctr|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC, \
+           TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+           LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,ENT, \
+           LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, RSFT,FN1, \
+           FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL),
+
+
+    /* Layer 1: HHKB mode (HHKB Fn)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+     * |-----------------------------------------------------'     |
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift |xxx|
+     * |-----------------------------------------------------------|
+     * |   |Gui |Alt  |                      |Alt  |Gui|   |   |Ctr|
+     * `-----------------------------------------------------------'
+     */ 
+    KEYMAP(PWR, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL, \
+           CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  INS, NLCK,\
+           LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
+           NO,  LGUI,LALT,SPC, RALT,NO,  NO,  NO,  RCTL),
+
+
+    /* Layer 2: Vi mode (Quote/Rmeta)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
+     * |-----------------------------------------------------------|
+     * |  \  |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End|   |   |   |     |
+     * |-----------------------------------------------------'     |
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |   \    |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|xxx|Shift |   |
+     * |-----------------------------------------------------------|
+     * |   |Gui |Alt  |Space                 |Alt  |Gui|Fn6|Fn6|Ctr|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+           BSLS,HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  NO,  \
+           LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  BSLS, \
+           LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT,NO, \
+           NO,  LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL),
+
+
+    /* Layer 3: Mouse mode (Semicolon)
+     * ,-----------------------------------------------------------.
+     * |  `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
+     * |-----------------------------------------------------------|
+     * |  \  |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR|   |   |   |     |
+     * |-----------------------------------------------------'     |
+     * |Contro|   |McL|McD|McR|   |McL|McD|McU|McR|xxx|   |   \    |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |Mb1|Mb2|Mb3|Mb2|Mb1|   |   |   |Shift |   |
+     * |-----------------------------------------------------------|
+     * |xxx|Gui |Alt  |Mb1                   |Alt  |   |   |   |   |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel 
+     */
+    KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+           BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  NO,  \
+           LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN3, NO,  BSLS, \
+           LSFT,NO,  NO,  BTN1,BTN2,BTN3,BTN2,BTN1,NO,  NO,  NO,  RSFT,NO, \
+           FN7, LGUI,LALT,BTN1,RALT,NO,  FN6, FN6, NO),
+
+
+    /* Layer 4: Matias half keyboard style (Space)
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |Backs|  P|  O|  I|  U|  Y|  T|  R|  E|  W|  Q|Tab|Tab|     |
+     * |-----------------------------------------------------'     |
+     * |Contro|  ;|  L|  K|  J|  H|  G|  F|  D|  S|  A|Con|Control |
+     * |-----------------------------------------------------------|
+     * |Shift   |  /|  .|  ,|  M|  N|  B|  V|  C|  X|  Z|Shift |   |
+     * |-----------------------------------------------------------|
+     * |   |Gui |Alt  |xxxxxxxxxxxxxxxxxxxxxx|Alt  |Gui|   |   |Ctr|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(MINS,0,   9,   8,   7,   6,   5,   4,   3,   2,   1,   NO,  NO,  ESC, \
+           BSPC,P,   O,   I,   U,   Y,   T,   R,   E,   W,   Q,   TAB, TAB, TAB, \
+           LCTL,SCLN,L,   K,   J,   H,   G,   F,   D,   S,   A,   RCTL,RCTL, \
+           LSFT,SLSH,DOT, COMM,M,   N,   B,   V,   C,   X,   Z,   RSFT,NO, \
+           NO,  LGUI,LALT,FN4, RALT,RGUI,NO,  NO,  RCTL),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t index)
+{
+    return pgm_read_byte(&fn_layer[index]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t index)
+{
+    return pgm_read_byte(&fn_keycode[index]);
+}

orphan/macway/led.c

@@ -0,0 +1,24 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}

orphan/macway/matrix.c

@@ -0,0 +1,217 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static matrix_row_t read_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRB = 0x00;
+    PORTB = 0xFF;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]))
+            return true;
+    }
+    return false;
+}
+#endif
+
+inline
+static matrix_row_t read_cols(void)
+{
+    return ~PINB;
+}
+
+inline
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRC  &= ~0b01000000; // PC: 6
+    PORTC &= ~0b01000000;
+    DDRD  &= ~0b11100111; // PD: 7,6,5,2,1,0
+    PORTD &= ~0b11100111;
+    DDRF  &= ~0b11000000; // PF: 7,6
+    PORTF &= ~0b11000000;
+}
+
+inline
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    // row: 0    1    2    3    4    5    6    7    8
+    // pin: PD0, PD5, PD7, PF6, PD6, PD1, PD2, PC6, PF7
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRD  |= (1<<5);
+            PORTD &= ~(1<<5);
+            break;
+        case 2:
+            DDRD  |= (1<<7);
+            PORTD &= ~(1<<7);
+            break;
+        case 3:
+            DDRF  |= (1<<6);
+            PORTF &= ~(1<<6);
+            break;
+        case 4:
+            DDRD  |= (1<<6);
+            PORTD &= ~(1<<6);
+            break;
+        case 5:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 6:
+            DDRD  |= (1<<2);
+            PORTD &= ~(1<<2);
+            break;
+        case 7:
+            DDRC  |= (1<<6);
+            PORTC &= ~(1<<6);
+            break;
+        case 8:
+            DDRF  |= (1<<7);
+            PORTF &= ~(1<<7);
+            break;
+    }
+}