max/tmk_keyboard
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

m0110_usb: Add unimap

Browse source
This commit is contained in:
tmk 2016-09-13 04:22:26 +09:00
parent c7fd5fcfb4
commit 9b17e27605
16 changed files with 2799 additions and 412 deletions
Download patch file Download diff file Expand all files Collapse all files

56
converter/m0110_usb/Makefile
View file

@ -1,31 +1,41 @@
# Target file name (without extension).
TARGET = m0110_lufa
TARGET ?= m0110_lufa
# Directory common source filess exist
TMK_DIR = ../../tmk_core
TMK_DIR ?= ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
TARGET_DIR ?= .
# keyboard dependent files
SRC = matrix.c \
SRC ?= matrix.c \
led.c \
m0110.c
# To use own keymap file run make like: make keymap=hasu
ifdef KEYMAP
SRC += keymap_$(KEYMAP).c
#
# Keymap file
#
ifdef UNIMAP_ENABLE
KEYMAP_FILE = unimap
else
SRC += keymap_default.c
ifdef ACTIONMAP_ENABLE
KEYMAP_FILE = actionmap
else
KEYMAP_FILE = keymap
endif
endif
ifdef KEYMAP
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
else
SRC := $(KEYMAP_FILE).c $(SRC)
endif
CONFIG_H = config.h
CONFIG_H ?= config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
MCU = atmega32u2 # TMK converter rev2
#MCU = atmega32u4 # TMK converter rev1
MCU ?= atmega32u2
# Processor frequency.
@ -33,14 +43,14 @@ MCU = atmega32u2 # TMK converter rev2
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
F_CPU ?= 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
@ -53,7 +63,7 @@ ARCH = AVR8
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@ -69,19 +79,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# *Comment out* to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
#BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
#SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
#KEYMAP_SECTION_ENABLE ?= yes # fixed address keymap for keymap editor
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
PROGRAM_CMD ?= teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path