max/tmk_keyboard
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

pc98_usb: Add ATMega32u4 support

Browse source
This commit is contained in:
tmk 2018-09-08 09:34:50 +09:00
parent effdef4187
commit f57b7b9087
2 changed files with 22 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

34
converter/pc98_usb/Makefile
View file

@ -1,29 +1,25 @@
# Target file name (without extension).
TARGET = pc98_usb
TARGET ?= pc98_usb
# Directory common source filess exist
TMK_DIR = ../../tmk_core
TMK_DIR ?= ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
TARGET_DIR ?= .
# keyboard dependent files
# Add one of lines below to select serial protocol implementation
# protocol/serial_uart.c
# protocol/serial_soft.c
SRC = matrix.c \
SRC ?= matrix.c \
protocol/serial_uart.c
CONFIG_H = config.h
CONFIG_H ?= config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
#MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
MCU = atmega32u2 # TMK Converter
MCU ?= atmega32u2 # TMK Converter
# Processor frequency.
@ -31,14 +27,14 @@ MCU = atmega32u2 # TMK Converter
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
F_CPU ?= 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
@ -51,7 +47,7 @@ ARCH = AVR8
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@ -60,12 +56,12 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# *Comment out* to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
#NKRO_ENABLE = yes # USB Nkey Rollover
UNIMAP_ENABLE = yes
MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control
CONSOLE_ENABLE ?= yes # Console for debug
COMMAND_ENABLE ?= yes # Commands for debug and configuration
#NKRO_ENABLE ?= yes # USB Nkey Rollover
UNIMAP_ENABLE ?= yes
# Boot Section Size in bytes

8
converter/pc98_usb/README
View file

@ -42,7 +42,7 @@ Frame format: 1-Start bit(Lo), 8-Data bits, Odd-Parity, 1-Stop bit
Build Firmware
--------------
Just use 'make' to bild firmware
Just use 'make' to bild firmware for TMK PC98 converter.
$ make clean
$ make
@ -53,6 +53,12 @@ To flash firmware
then push button on converter to flash firmware.
If you are using ATMega32u4 based board instead of premade TMK PC98 converter(ATMega32u2) use following commands.
$ make -f Makefile.32u4 clean
$ make -f Makefile.32u4
$ make -f Makefile.32u4 dfu
PC98 Scan Codes