Merge remote-tracking branch 'upstream/master'

README.md

@@ -19,3 +19,148 @@ License
 **GPLv2** or later. Some protocol files are under **Modified BSD License**.
 
 Third party libraries like LUFA, PJRC and V-USB have their own license respectively.
+
+
+Build Firmware and Program Controller
+-------------------------------------
+See [tmk_core/doc/build.md](tmk_core/doc/build.md).
+
+
+
+Change your keymap
+------------------
+See [tmk_core/doc/keymap.md](tmk_core/doc/keymap.md).
+
+
+
+Magic Commands
+--------------
+To see help press `Magic` + `H`.
+
+`Magic` key combination is `LShift` + `RShift` in many projects, but `Power` key on ADB converter.
+`Magic` keybind can be vary on each project, check `config.h` in project directory.
+
+Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
+
+    ----- Command Help -----
+    c:      enter console mode
+    d:      toggle debug enable
+    x:      toggle matrix debug
+    k:      toggle keyboard debug
+    m:      toggle mouse debug
+    v:      print device version & info
+    t:      print timer count
+    s:      print status
+    e:	    print eeprom config
+    n:	    toggle NKRO
+    0/F10:  switch to Layer0
+    1/F1:   switch to Layer1
+    2/F2:   switch to Layer2
+    3/F3:   switch to Layer3
+    4/F4:   switch to Layer4
+    PScr:   power down/remote wake-up
+    Caps:   Lock Keyboard(Child Proof)
+    Paus:   jump to bootloader
+
+
+
+Boot Magic Configuration - Virtual DIP Switch
+---------------------------------------------
+Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
+Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
+
+To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](tmk_core/common/bootmagic.h).
+
+#### General
+- Skip reading EEPROM to start with default configuration(`ESC`)
+- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
+
+#### Bootloader
+- Kick up Bootloader(`B`)
+
+#### Debug
+- Debug enable(`D`)
+- Debug matrix enable(`D`+`X`)
+- Debug keyboard enable(`D`+`K`)
+- Debug mouse enable(`D`+`M`)
+
+#### Keymap
+- Swap Control and CapsLock(`Left Control`)
+- Change CapsLock to Control(`Caps Lock`)
+- Swap LeftAlt and Gui(`Left Alt`)
+- Swap RightAlt and Gui(`Right Alt`)
+- Disable Gui(`Left Gui`)
+- Swap Grave and Escape(`Grave`)
+- Swap BackSlash and BackSpace(`Back Slash`)
+- Enable NKRO on boot(`N`)
+
+#### Default Layer
+- Set Default Layer to 0(`0`)
+- Set Default Layer to 1(`1`)
+- Set Default Layer to 2(`2`)
+- Set Default Layer to 3(`3`)
+- Set Default Layer to 4(`4`)
+- Set Default Layer to 5(`5`)
+- Set Default Layer to 6(`6`)
+- Set Default Layer to 7(`7`)
+
+
+
+Mechanical Locking support
+--------------------------
+This feature makes it possible for you to use mechanical locking switch for `CapsLock`, `NumLock`
+or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LN
+UM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Res
+ync option tries to keep switch state consistent with keyboard LED state.
+
+    #define LOCKING_SUPPORT_ENABLE
+    #define LOCKING_RESYNC_ENABLE
+
+
+
+Start Your Own Project
+-----------------------
+1. Add `tmk_core` into your repository using `git submodule` or `git subtree`.
+2. Copy files from `tmk_keybaord` or other project similar to yours
+3. Edit those files to support your keyboard.
+
+See these as examples.
+- https://github.com/tmk/infinity_ergodox
+- https://github.com/tmk/whitefox
+
+
+
+Debugging
+--------
+Use PJRC's `hid_listen` to see debug messages. You can use xprintf() to display debug info, see `tmk_core/common/xprintf.h`.
+
+- https://www.pjrc.com/teensy/hid_listen.html
+
+
+
+Files and Directories
+-------------------
+### Top
+* keyboard/     - keyboard projects
+* converter/    - protocol converter projects
+* tmk_core/     - core library
+* tmk_core/doc/ - documents
+
+
+
+Contribution
+------------
+- Report bugs in github **[Issues](https://github.com/tmk/tmk_keyboard/issues)**.
+- Pull requets are also welcomed.
+
+
+
+Coding Style
+-------------
+- Doesn't use Tab to indent, use 4-spaces instead.
+
+
+
+Other Keyboard Firmware Projects
+------------------
+You can learn a lot about keyboard firmware from these. See [Other Projects](https://github.com/tmk/tmk_keyboard/wiki/Other-Protjects) other than TMK.

keyboard/ergodox/Ergodox-FAQ.md

@@ -42,11 +42,11 @@ https://github.com/cub-uanic/tmk_keyboard/tree/master
 
     # use one of these
     make -f Makefile.lufa
-    make -f Makefile.lufa KEYMAP=dvorak
-    make -f Makefile.lufa KEYMAP=colemak
-    make -f Makefile.lufa KEYMAP=workman
-    make -f Makefile.lufa KEYMAP=micro
-    make -f Makefile.lufa KEYMAP=cub
+    make -f Makefile.lufa dvorak
+    make -f Makefile.lufa colemak
+    make -f Makefile.lufa workman
+    make -f Makefile.lufa micro
+    make -f Makefile.lufa cub
 
 
 # Layouts

keyboard/ergodox/Makefile.lufa

@@ -114,6 +114,7 @@ EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
 CONSOLE_ENABLE = yes    # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover (+500)
 #PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 INVERT_NUMLOCK = yes 	# invert state of NumLock led
 

tmk_core/protocol/pjrc/main.c

@@ -36,7 +36,6 @@
 #include "suspend.h"
 #include "host.h"
 #include "pjrc.h"
-#include "sleep_led.h"
 
 
 #define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))

tmk_core/protocol/usb_hid/USB_Host_Shield_2.0-tmk

@@ -1 +1 @@
-Subproject commit df8e64d0500c012c47b637522d0c1b33c3683e91
+Subproject commit b6128f252700a8dd2d12400c55680ef67cdcac86