PC98 to USB keyboard protocol converter ======================================= TMK Keyboard protocol converter for NEC PC-9801 series that allows you to use PC-9801 keyboard on modern USB PC. Main target is TMK prebuilt converter(ATMega32u2) but it will work on dev boards with ATMega32u4. You can buy [TMK prebuilt converter](https://geekhack.org/index.php?topic=72052.0) here to support this project. Discuss or report issue on github or [this thread](https://geekhack.org/index.php?topic=110094.0). See [this wiki page](https://github.com/tmk/tmk_keyboard/wiki/PC-9801-Keyboard) for PC98 keyboard technical infos. Connector --------- On host/converter: 8Pin mini DIN ___ ___ / |_| \ / 8 7 6 \ | 5 4 3 | \_ 2 1 _/ \_____/ (receptacle) Pin mini DIN AVR Pins ---------------------------------- 1 ~RST(TXD) PD3 2 GND GND 3 ~RDY PD4 4 RXD PD2 5 ~RTY PD1 6 NC 7 NC 8 5V VCC Prebilt Firmware ---------------- Prebuilt firmware HEX files are available under 'binary' directory. Build Firmware -------------- ### TMK PC98 Converter Just use 'make' to bild firmware for TMK PC98 converter(ATMega32u2). $ make clean $ make To flash firmware run this command $ make dfu then push button on the converter to flash firmware. ### Ohter boards If you are using ATMega32u4 based board use following commands to get firmware HEX file. $ make -f Makefile.32u4 clean $ make -f Makefile.32u4 And flash it on your board using specific program method. Raku Raku keyboard support -------------------------- This is not supported actively anymore. NEC PC-9801-98-S02 - raku raku keyboard: https://deskthority.net/photos-f62/nec-pc-9801-98-s02-t5212.html To build firmware for the keyboard $ make KEYMAP=rakuraku clean $ make KEYMAP=rakuraku $ make KEYMAP=rakuraku dfu Its scan code map is very different from standard types. See `unimap_trans.h` and `unimap_rakuraku.c`.