Commit graph

413 commits

Author SHA1 Message Date
tmk
bb955a819a ibmpc_usb: Update prebuilt firmware files 2020-11-22 04:28:19 +09:00
tmk
6b71d88150 xt_usb: Fix Pause of Code Set1(XT) 2020-11-22 04:21:16 +09:00
tmk
acb15b4a50 ibmpc_usb: Fix Pause of Code Set1(XT)
https://geekhack.org/index.php?topic=17458.msg2980704#msg2980704
2020-11-22 04:20:47 +09:00
tmk
385ede5722 usb_usb: Update prebuilt firmware files 2020-11-07 18:12:02 +09:00
tmk
df164fecc9 usb_usb: Add Mechanical Locking key support 2020-11-07 17:16:20 +09:00
tmk
6da19ef6b0 usb_usb: Update prebuilt firmware files 2020-11-06 00:42:09 +09:00
tmk
d9a8eb59df usb_usb: Update Makefile.debug
enable debug print on USB Host lib and disable on LUFA
2020-11-06 00:19:35 +09:00
tmk
7f7b7ffdc2 xt_usb: Fix comment of scancode 2020-10-27 04:28:01 +09:00
tmk
842b3f29b6 ibmpc: Fix XT reset comment and add inhibit_xt() 2020-10-27 02:33:33 +09:00
tmk
19853b4b83 ibmpc_usb: Update prebuilt firmware files 2020-07-05 12:56:43 +09:00
tmk
5bcec22440 ibmpc: Update prebuilt firmware files 2020-05-22 13:15:51 +09:00
tmk
c6a6049bc8 ibmpc_usb: Add 'protocol change detection'
for better keybaord hotswap support
2020-05-13 14:47:18 +09:00
tmk
d987783c1a ibmpc_usb: Fix scan code set change detection 2020-05-12 21:57:32 +09:00
tmk
c124220997 ibmpc_usb: Update debug prints 2020-05-12 18:59:19 +09:00
tmk
9fda70c476 ibmpc_usb: Add AT_RESET with reset command 'FF' 2020-05-12 18:56:54 +09:00
tmk
fa58765325 ibmpc_usb: Fix led_set for XT keyobard 2020-05-12 11:32:28 +09:00
tmk
42b7bf8942 ibmpc_usb: Update prebuilt firmware files 2020-05-11 17:16:37 +09:00
tmk
b59f7655e3 ibmpc_usb: Remove invalid code check in Code Set 1 2020-05-11 16:13:47 +09:00
tmk
0661ef8a56 ibmpc_usb: Update Overrun and buffer full handling(00, FF) 2020-05-11 16:13:47 +09:00
tmk
846f55389a ibmpc_usb: Fix led_set 2020-05-11 16:12:36 +09:00
tmk
fcebf2215f ibmpc_usb: Add protocol and isr_debug check 2020-05-11 16:12:36 +09:00
tmk
8c72e93314 ibm4704: Use INTERRUPT_CONTROL_ENDPOINT to debug prints 2020-05-08 22:39:55 +09:00
tmk
e2ac2d746f usb_usb: Remove hook_usb_startup_wait_loop
matrix_scan in hook_usb_startup_wait_loop is not required for
FC660C since commit dd7b75: SOF timing fix of USB_Host_Shield_2.0.
Without INTERRUPT_CONTROL_ENDPOINT the matrix_scan blocks around 2300ms
and prevents getting USB configured. In the result console_putc
starts sending before hid_listen is ready and chars are lost.

console_is_ready delay value should be around 5000ms if matrix_scan
is needed in hook_usb_startup_wait_loop.
2020-05-08 22:39:55 +09:00
tmk
2173767a78 Remove INTERRUPT_CONTROL_ENDPOINT from converters
The LUFA feature can prevent converter's ISR from handing signal instantly.
The interrupt can block a while for Standard Device Requests and 500-1000us
for keyboard LED report.
2020-05-08 22:39:55 +09:00
tmk
2a98bf516a ibmpc_usb: Fix Code Set 2 for Z-150 SysRq
Zenith Z-150 AT sends scan code 0x7F for SysRq.
Accoding to i8042 translation table it maps both 0x7F and
0x84 into 0x54(Print Screen).
https://geekhack.org/index.php?topic=103648.msg2897404#msg2897404

Swap MUTE and PSCR in unimap_cs2.
2020-05-08 21:45:45 +09:00
tmk
2c08ed9d94 ibmpc_usb: Fix Makefile 2020-05-08 21:43:24 +09:00
tmk
6332da2b95 ibmpc_usb: Add keyboard id AB85, BFB0
Other 122-key Teminals and IBM RT
2020-05-06 15:56:44 +09:00
tmk
2e5e6a69bc ibmpc_usb: Update firmware files again 2020-04-28 12:29:07 +09:00
tmk
b6ccbacdaa ibmpc_usb: Update prebuilt firmware files 2020-04-28 12:21:05 +09:00
tmk
aa276d55c4 ibmpc_usb: Add some comments 2020-04-28 12:18:56 +09:00
tmk
c4f65d4f5e ibmpc_usb: Remove G80-2551 support from Code Set 2 2020-04-28 12:07:19 +09:00
tmk
c6786290bc ibmpc_usb: Add G80-2551 support in Code Set 3
https://deskthority.net/wiki/Cherry_G80-2551
https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-AT-Keyboard-Protocol#g80-2551-in-code-set-3
https://geekhack.org/index.php?topic=103648.msg2894921#msg2894921
2020-04-28 11:59:20 +09:00
tmk
87bd991afa ibmpc_usb: Add codes in Set 3
GUI, Application, Henkan, Mehenkan, Kana used in PS/2 PC
keyboard when it is switched to Set 3
https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-AT-Keyboard-Protocol#g80-3600-and-skidata2-de-in-code-set-3
2020-04-28 11:33:02 +09:00
tmk
1575db9166 ibmpc_usb: Update prebuilt firmware hex files 2020-04-26 23:35:59 +09:00
tmk
da1ca3ab6f ibmpc_usb: Add support for G80-2551
Support for extra keys around cursor keys
https://deskthority.net/wiki/Cherry_G80-2551
https://geekhack.org/index.php?topic=103648.msg2893404#msg2893404
https://gist.github.com/tmk/22cb8680ca8ef854630ecd1953268c5b
2020-04-26 23:28:03 +09:00
tmk
890af7e7e3 ibmpc_usb: Change key mapping for Code Set 3 2020-04-26 18:39:47 +09:00
tmk
48058c638e sun_usb: Add prebuilt firmware files 2020-04-09 13:57:48 +09:00
tmk
e63aff8715 sun_usb: Add Makefile for ATmega32U4 2020-04-09 13:56:20 +09:00
tmk
05c2df1237 sun_usb: Update README and rename to .md 2020-04-08 17:54:15 +09:00
tmk
8898747b09 sun_usb: Add unimap support 2020-04-08 17:38:33 +09:00
tmk
8f86d125c3 ibmpc_usb: Update firmware hex files 2020-03-22 21:30:22 +09:00
tmk
fefe1028de ibmpc_usb: Add comment on INTERRUPT_CONTROL_ENDPOINT 2020-03-20 14:43:52 +09:00
tmk
a4d4f14942 ibmpc_usb: Fix CS3 scan code in comment 2020-03-04 08:02:16 +09:00
tmk
f99d1b12e7 ibmpc_usb: Update README 2020-03-02 14:44:39 +09:00
tmk
c7160e29bb ibmpc_usb: Update firmware binary 2020-03-02 14:33:25 +09:00
tmk
f9fb97707f ibmpc_usb: Change keymap for application key 2020-03-02 14:21:54 +09:00
tmk
8e7027f115 ibmpc_usb: Check overrun error for CS2 and CS3 2020-03-02 14:10:27 +09:00
tmk
28cd55c1bf ibmpc_usb: Check invalid code for CS1 2020-03-02 14:09:34 +09:00
tmk
c023e5feea ibmpc_usb: Wait BAT(AA) code forever 2020-03-01 23:33:29 +09:00
tmk
0c80bfca71 ibmpc_usb: Error recovery with invalid scan code 2020-03-01 23:23:55 +09:00