Add include for sleep_led

Update command in ergodox FAQ.

README.md

@@ -19,148 +19,3 @@ License
 **GPLv2** or later. Some protocol files are under **Modified BSD License**.
 
 Third party libraries like LUFA, PJRC and V-USB have their own license respectively.
-
-
-Build Firmware and Program Controller
--------------------------------------
-See [tmk_core/doc/build.md](tmk_core/doc/build.md).
-
-
-
-Change your keymap
-------------------
-See [tmk_core/doc/keymap.md](tmk_core/doc/keymap.md).
-
-
-
-Magic Commands
---------------
-To see help press `Magic` + `H`.
-
-`Magic` key combination is `LShift` + `RShift` in many projects, but `Power` key on ADB converter.
-`Magic` keybind can be vary on each project, check `config.h` in project directory.
-
-Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
-
-    ----- Command Help -----
-    c:      enter console mode
-    d:      toggle debug enable
-    x:      toggle matrix debug
-    k:      toggle keyboard debug
-    m:      toggle mouse debug
-    v:      print device version & info
-    t:      print timer count
-    s:      print status
-    e:	    print eeprom config
-    n:	    toggle NKRO
-    0/F10:  switch to Layer0
-    1/F1:   switch to Layer1
-    2/F2:   switch to Layer2
-    3/F3:   switch to Layer3
-    4/F4:   switch to Layer4
-    PScr:   power down/remote wake-up
-    Caps:   Lock Keyboard(Child Proof)
-    Paus:   jump to bootloader
-
-
-
-Boot Magic Configuration - Virtual DIP Switch
----------------------------------------------
-Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
-Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
-
-To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](tmk_core/common/bootmagic.h).
-
-#### General
-- Skip reading EEPROM to start with default configuration(`ESC`)
-- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
-
-#### Bootloader
-- Kick up Bootloader(`B`)
-
-#### Debug
-- Debug enable(`D`)
-- Debug matrix enable(`D`+`X`)
-- Debug keyboard enable(`D`+`K`)
-- Debug mouse enable(`D`+`M`)
-
-#### Keymap
-- Swap Control and CapsLock(`Left Control`)
-- Change CapsLock to Control(`Caps Lock`)
-- Swap LeftAlt and Gui(`Left Alt`)
-- Swap RightAlt and Gui(`Right Alt`)
-- Disable Gui(`Left Gui`)
-- Swap Grave and Escape(`Grave`)
-- Swap BackSlash and BackSpace(`Back Slash`)
-- Enable NKRO on boot(`N`)
-
-#### Default Layer
-- Set Default Layer to 0(`0`)
-- Set Default Layer to 1(`1`)
-- Set Default Layer to 2(`2`)
-- Set Default Layer to 3(`3`)
-- Set Default Layer to 4(`4`)
-- Set Default Layer to 5(`5`)
-- Set Default Layer to 6(`6`)
-- Set Default Layer to 7(`7`)
-
-
-
-Mechanical Locking support
---------------------------
-This feature makes it possible for you to use mechanical locking switch for `CapsLock`, `NumLock`
-or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LN
-UM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Res
-ync option tries to keep switch state consistent with keyboard LED state.
-
-    #define LOCKING_SUPPORT_ENABLE
-    #define LOCKING_RESYNC_ENABLE
-
-
-
-Start Your Own Project
------------------------
-1. Add `tmk_core` into your repository using `git submodule` or `git subtree`.
-2. Copy files from `tmk_keybaord` or other project similar to yours
-3. Edit those files to support your keyboard.
-
-See these as examples.
-- https://github.com/tmk/infinity_ergodox
-- https://github.com/tmk/whitefox
-
-
-
-Debugging
---------
-Use PJRC's `hid_listen` to see debug messages. You can use xprintf() to display debug info, see `tmk_core/common/xprintf.h`.
-
-- https://www.pjrc.com/teensy/hid_listen.html
-
-
-
-Files and Directories
--------------------
-### Top
-* keyboard/     - keyboard projects
-* converter/    - protocol converter projects
-* tmk_core/     - core library
-* tmk_core/doc/ - documents
-
-
-
-Contribution
-------------
-- Report bugs in github **[Issues](https://github.com/tmk/tmk_keyboard/issues)**.
-- Pull requets are also welcomed.
-
-
-
-Coding Style
--------------
-- Doesn't use Tab to indent, use 4-spaces instead.
-
-
-
-Other Keyboard Firmware Projects
-------------------
-You can learn a lot about keyboard firmware from these. See [Other Projects](https://github.com/tmk/tmk_keyboard/wiki/Other-Protjects) other than TMK.

keyboard/ergodox/Ergodox-FAQ.md

@@ -42,11 +42,11 @@ https://github.com/cub-uanic/tmk_keyboard/tree/master
 
     # use one of these
     make -f Makefile.lufa
-    make -f Makefile.lufa dvorak
+    make -f Makefile.lufa KEYMAP=dvorak
-    make -f Makefile.lufa colemak
+    make -f Makefile.lufa KEYMAP=colemak
-    make -f Makefile.lufa workman
+    make -f Makefile.lufa KEYMAP=workman
-    make -f Makefile.lufa micro
+    make -f Makefile.lufa KEYMAP=micro
-    make -f Makefile.lufa cub
+    make -f Makefile.lufa KEYMAP=cub
 
 
 # Layouts

keyboard/ergodox/Makefile.lufa

@@ -114,7 +114,6 @@ EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
 CONSOLE_ENABLE = yes    # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover (+500)
 #PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
 INVERT_NUMLOCK = yes 	# invert state of NumLock led
 

tmk_core/protocol/pjrc/main.c

@@ -36,6 +36,7 @@
 #include "suspend.h"
 #include "host.h"
 #include "pjrc.h"
+#include "sleep_led.h"
 
 
 #define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))

tmk_core/protocol/usb_hid/USB_Host_Shield_2.0-tmk

@@ -1 +1 @@
-Subproject commit b6128f252700a8dd2d12400c55680ef67cdcac86
+Subproject commit df8e64d0500c012c47b637522d0c1b33c3683e91